The Stratasys H550 is a large-format powder bed fusion printer built on the same Selective Absorption Fusion (SAF) technology as the H350, with an 80% larger build volume, up to 50% higher throughput, and lower total cost of ownership per part. Announced at Formnext 2026 with commercial availability expected in Q2 2027, the H550 targets manufacturers and service bureaus that have hit the size or productivity limits of their current SAF or MJF platform.
The Stratasys H550 SAF 3D printer.
SAF is a powder bed fusion process developed by Stratasys. A dual-sled system deposits polymer powder in precise layers, applies a High Absorbing Fluid (HAF) to the cross-sections that form the part geometry, then passes an infrared energy source across the bed to sinter those regions. The continuous dual-sled design keeps the system running without pauses between layers, and the surrounding un-sintered powder supports parts during the build. That powder is reclaimed and reused after each job.
The H550 runs the same process and the same materials as the H350. The difference is scale. The Z-axis grows from 293mm to 450mm, allowing parts that previously required splitting into multiple builds to print as a single piece. Total build volume is 365 x 208 x 450mm at 34.2 liters. That Z-dimension also gives the H550 a 20% longer vertical axis than the leading MJF system.
H550 build specifications
Build volume: 365 x 208 x 450mm
Print volume: 34.2 liters (80% larger than H350)
Z-axis: 450mm (up from 293mm on H350)
Materials: SAF PA12, SAF PA12 Powered by Evonik
Consumables: Powder and HAF only (no printhead, cleaning roll, detailing agent, or filters)
Applications that benefit most from the larger chamber include large UAV frames and airframe components, automotive manifolds and duct assemblies, ankle-foot orthoses and prosthetic sockets, industrial end-of-arm tooling, and dense production runs of small-to-medium parts. For existing H350 users, jobs that required splitting across multiple builds become single-build runs on the H550.
An exhaust manifold printed on the H550.
Compared to the H350, the H550 fits more than twice as many parts per build, with up to 50% higher overall throughput. Maximum build time for any H550 job is 16.5 hours regardless of how many parts are nested in the bed. GrabCAD Print handles part nesting and job preparation, so operators can maximize fill density without manual layout work.
The H550 is designed to run alongside the PowderEase T2, an automated unit that handles powder breakout, sieving, and dosing in a single system. One PowderEase T2 serves up to six H550 printers on the same material. Total operator time per build runs under 30 minutes. Because the system uses only powder and HAF, there are no consumable printheads, cleaning rolls, detailing agents, or filters to manage or replace.
FPV drone frames printed on the H550. Black frames have undergone secondary operations.
The H550's larger chamber raises nesting density and reduces the per-part share of fixed build costs. Jobs that previously required two or more H350 builds consolidate into one, cutting support-powder usage and idle time between runs. Combined with the simplified consumable model, the H550 delivers up to 10% lower total cost of ownership than the H350. Compared to the leading MJF platform, TCO is up to 30% lower, and capital cost is 30 to 50% lower. The PA12 powder is reusable: unsintered material from each build is reclaimed, refreshed, and dosed back into the next run, keeping material waste low even at high production volumes.
| H350 | H550 | |
|---|---|---|
| Build volume | 315 x 208 x 293mm (19.2L) | 365 x 208 x 450mm (34.2L) |
| Z-axis | 293mm | 450mm |
| Parts per build vs. H350 | Baseline | More than 2x |
| Throughput vs. H350 | Baseline | Up to 50% higher |
| TCO vs. H350 | Baseline | Up to 10% lower |
| TCO vs. MJF | -- | Up to 30% lower |
| CAPEX vs. MJF | -- | 30 to 50% lower |
| Operator time per build | -- | Under 30 minutes |
| Powder management | PowderEase | PowderEase T2 (1 unit serves up to 6 printers) |
| Applications | Small to mid-size parts | Small, mid-size, and large parts |
CADimensions is an authorized Stratasys reseller. If you're evaluating the H550 for a production environment, or want to compare it against your current platform, contact us to speak with a specialist.